12 Best Dent Pullers & Dent Repair Kits in 2022 - Mechanic Approved (2024)

No matter how much of an expert you are at driving a car, chances are you will eventually accumulate some dings and dents over time. Whether it’s some other reckless driver or a short lapse of judgment while you park your car, these small accidents are a part of the driving experience. Our cars are a part of our identity, and it’s important that they always look sharp, clean, and dent-free. For most of us, dents can be a nuisance and even nauseating when you see what a dealership charges to fix them. That is why this list is a must-read for anyone that is willing to fix the problem themselves!

A car dent puller is a simple machine or kit that you can use by yourself to remove a dent from your car and make it look good as new in the comfort of your garage. Unfortunately, some mechanics and dealerships take advantage of the imperfect distribution of car knowledge and charge you more than the actual cost to fix it, which then you are then compelled to pay which can easily drain a savings account.

There are plenty of dent pullers available on the market and online, with different makes, models, and costs. How do you know which dent repair kit is the best? Well, you don’t have to worry we got you covered! Here is a comprehensive guide for both car repair novices and experts on which car dent repair kit is best for you!

Here Are The Best Dent Pullers and Auto Repair Kits

1. Mookis Car Dent Repair Kit (Best Overall)

Shop Amazon

Key Specifications:

• Around $130
• 1 Dent Puller
• 1 Slide Hammer
• 1 Bridge Puller Set
• 2 Rubber hammers
• 1 Tap down pen
• 1 Hot glue gun
• 15 Glue Sticks
• 36 different Pulling Tabs
• Made from high-quality materials
• Will fix a vast variety of dents

The Mookis Car Dent Repair Kit is just a little over $100, but the performance is worth every penny. What sets this kit apart from the rest of the products featured here is that each component in each kit has been tested by professionals to check performance, strength, and durability. Every procedure that each component has to perform is monitored and only the parts that pass the test are included in the kits. This kit contains 77 high-quality pieces made of high carbon steel for maximum endurance and strength and is suitable for both experts and beginners alike! Users are always blown away by the sheer quality of performance shown by this dent repair kit and it saves the buyers precious hours and money spent on the auto body repair shops. The kit can be used for any metallic mechanical body including your car, your refrigerator, and your motorcycle, amongst many others.

2. Fly5D Auto Body Paintless Dent Repair Kit (Best Under $100)

Shop Amazon

Key Specifications:

• Around $50
• 1 Hot glue gun
• 1 Tap down pen
• 1 Bridge dent puller
• 1 Manual dent puller
• 1 Dent lifter
• 1 Rubber hammer
• 26 puller tabs
• 15 glue sticks
• 1 Carrying case
• 3 Year warranty

This kit is perfect for dent of all shapes and sizes! The Fly5D paintless dent repair kit consists of 44 assorted tools and utensils that are certain to accomplish the task at hand. Fly5D has recently updated and redesigned this kit based on customer reviews to make sure that satisfaction and practical use is guaranteed across all of the items included in this package. They are so confident in this product that they provide a 3 year warranty with all purchases. Personally, one of my favorite things about this kit that makes it stand out from the other is that it includes a manual dent puller (the pink handled object). When you have experience in autobody repair like I do you can never underestimate good old-fashioned elbow grease! Sometimes you need to just hold on tight and pull with all your might to get the most difficult and deep dents pulled out. This assortment also includes a variety of pull tabs of all shapes and sizes which will help you match the shape and size of almost any dent.

3. BBKANG Paintless Dent Repair Kit

Shop Amazon

Key Specifications:

• Around $80
• 1 T-Bar
• 1 Hand held dent lifter
• 1 Hot glue gun
• 1 Rubber hammer
• 1 Tap Down pen
• Comes with an instruction manual
• Easy to use

If you’re looking for one kit that gets the job done without any fuss, it should be the BBKANG Paintless Dent Repair Kit. It features the dent removal kit that comes with a golden dent lifter, a slide T-shaped hammer bar, dent pulling tabs, strong adhesive glue sticks, and bridge dent puller amongst many others. The kit also contains a detailed instruction manual to make the process of removing your dent as easy as possible. You also get a flexible and more potent 2-in-1 slide hammer with this package that will work with the glue. All sorts of dents, regardless of size or depth, are often fixed by different tabs. The BBKang PDR-05 is unbeatable when you are on the lookout for the best PDR package, as it comes with all you need to easily fix dents and dings.

4. Manelord Auto Body Repair Tool Kit

Shop Amazon

Key Specifications:

• Around $25
• 1 Bridge dent puller
• 1 Glue Gun
• 4 Glue sticks
• 10 Puller tabs
• 2 Glue scrapers
• It can be used easily to repair even the smallest of dents
• Customer service available

This is one of those body repair kits that any DIY car guru cannot do without. The Manelord Auto Body Repair Tool Kit is so popular, sturdy, and trusted that it is always out of stock at the major retailers that house car dent pulling equipment. The kit features an ergonomically designed set with levers that have a unique arched shaped design which helps manage the space between the dent and the equipment and gives you the right amount of torque to help you get maximum results with minimum effort. It can be used on automobiles, as well as for dents on refrigerators and washing machines. The kit includes a double pole dent puller, 10 pieces of black and blue puller tabs, a 2 glue shovels, an empty spray container, a hot glue gun, and 4 glue sticks.

5. AUTOPDR 40-Piece DIY Paintless Dent Removal Tool Kit

Shop Amazon

Key Specifications:

• Around $50
• 1 Handheld dent puller
• 1 Bridge Dent puller
• 1 Tap down Pen
• 1 Rubber hammer
• 1 Hot glue gun
• 5 Glue Sticks
• Includes carrying case
• Includes three-year quality assurance warranty

The AUTOPDR tool for the dent is made of strong stainless steel. It is specially designed to prevent damage to the original paint in the areas where this product comes in contact with he surface of your vehicle. The kit contains around 48 multi-purpose tools that are perfect for a wide range of dents. This kit also includes a glue gun which you will not find very often amongst competitors. Additionally, this product also comes with a three-year quality assurance that comes with each toolkit purchased. Every part of the kit is well-made and perfect for a successful and long-lasting operation. Major items included in this list are as follows, a rubber hammer, adjustable dent lifter, and a variety of puller tabs.

The PDR equipment can also be recycled for those who try to as green as possible. This dent puller is perfect for popping out dents on other surfaces like exterior doors and household appliances.

6. YOOHE Paintless Dent Repair Puller Kit

Shop Amazon

Key Specifications:

• Around $35
• Suitable for almost all kinds of dents
• 1 T-bar
• 16 Pull tabs
• 1 Hot glue gun
• 10 Glue sticks
• High-quality stainless steel design

The YOOHE Paintless Dent Repair Puller Kit is one of the best dent repair kits available on the market. The kit includes a hot glue gun, a stainless steel T-Bar, and a wide variety of pull tabs that are guaranteed to match the shape and size of almost any dent. The construction of this kit is sturdy and made to last making it a perfect one-time purchase for you mechanics and car gurus looking for a quality dent puller. This kit is also quite versatile and can be used on other surfaces like metal doors and household appliances.

7. ARISD Auto Paintless Dent Repair Kit

Shop Amazon

Key Specifications:

• Around $35
• 1 Hot glue gun
• 10 glue sticks
• 14 Pull tabs
• Made of high carbon steel
• Can repair even the smallest of dents
• Amazon offers customer support

If you have been looking for durability with performance, you need to look no further. The ARISD Auto Paintless Dent Repair Kit should be the best new addition to your self-sufficient garage or repair shop. This kit contains everything you would need for that perfect DIY dent pulling routine. It comes with 15 different shaped tabs that can work on any dent of any shape which provides more versatility than other repair kits. The kit includes two different styles of dent pullers, a bridge puller, and a handheld dent puller, both made with steel components that are made to last. The rubber used for the lining of the steel components is soft and smooth which allows this product to function without leaving any scratches behind. The product is not only suitable for cars but also for other metal bodies such as refrigerators and other household appliances. A major plus for this kit is that it is very user friendly and allows even the most novice repairman to successfully lift a dent.

8. Wcaro Dent Rods For Paintless Dent Removal

Shop Amazon

Key Specifications:

• Around $120
• 10 dent rods
• 1 Rubber hammer
• 1 Tap down pen
• Includes a plastic wedge
• Perfect for small dents
• Includes carrying case

The Wcaro Car Auto Body Dent Kit is the perfect choice for all types of small irritating dents that other dent pullers cannot fix. This kit is more of a precision dent repair kit compared to the others we have reviewed thus far because this list consists of “dent rods”. These rods are found in a variety of shapes and sizes and each one is tailored to a specific type of dent. Now because dent rods are quite a bit harder to use than other retail dent pullers, they require a little bit more know-how and elbow grease. They work by being inserted behind the surface of a car door either by gaining entrance through the locking mechanism or the window sleeve. They then use reverse pressure applied from the back of the dented surface by prying the rod and forcing the dent out from the inside. This type of kit is perfect for hail type damage and make no mistake, the finished results you will get from these type of dent rods will leave your vehicle surface looking good as new.

9. GS DIY Paintless Dent Repair Kit Metal Tap Down Pen

Shop Amazon

Key Specifications:

• Around $10
• Easy to use
• Includes 1 tap down pen
• Includes 9 different pen tips
• Perfect for precise dent correction
• Helps with small dings on the metallic surface

The GS DIY Paintless Dent Repair Tap Down Pen Kit is an affordable and very convenient kit that helps you to quickly tap down any annoying dents on the surface of your vehicle. It is a perfect addition for anyone looking to expand their auto body repair tools. Tap Down Pens are a bit different from other dent repair kits that we have featured thus far in that they are used to manipulate a dent so that other dent repair tools can yield better results. Although uncommon, dents can also happen from the inside leaving a bulging dent on the surface and this type of dent is what you would use a tap down pen for. There are also some great videos online teaching you how a tap down kit like the GS DIY kit can be used correctly. This kit includes the pen itself and nine different heads. In addition to automotive use, a tap down pen can be used on other metallic surfaces like refrigerators, doors, and other household appliances.

10. GLISTON Paintless Dent Repair Remover Kit

Shop Amazon

Key Specifications:

• Around $50
• Inexpensive and user friendly
• 1 Dent lifter
• 1 Tap down pen
• 16 puller tabs of various sizes
• 1 Rubber hammer
• Includes instruction manual
• Carrying case included
• Amazon quality assurance guaranteed

This kit is your one-stop-shop for your dent repair needs! It consists of an extensive array of 35 different types of dent repair tools that are sure to help you repair a dent of any shape or size. The components that make up this kit are well made with strong polyethylene and steel and are guaranteed to last. One of the best characteristics of this kit is that it is very paint-friendly, by using soft rubber feet on any point that comes in contact with your original paint job, so you do not have to worry about touch-up after you’re done pulling out the dent. Gliston also went out of their way to provide detailed instructions so that even the most novice repairman or women will be able to successfully repair any dent.

11. YOOHE Black Aluminum Suction Cup Dent Puller

Shop Amazon

Key Specifications:

• Around $20
• Can lift up to 200lbs
• Aluminum handles
• Silicone suction cup
• 4.7″ suction cup diameter
• Hassle-free usage

I have been working as a mechanic and autobody repairman for quite a few years and I can tell you firsthand that this product has come in handy more times than I can recall. I always urge my buddies in the industry to buy one of these and just have it laying somewhere in the garage because you will most definitely use it. The YOOHE suction cup is perfect for pulling large dents from flat surfaces like hoods, doors, and quarter panels. The amount of suction force you can get from one of these is unparalleled and has never slipped when I was pulling my hardest. It has also come in handy in a few other situations around the garage as well, for example, when carrying around windshields and lowering them into place this suction cup worked to perfection! The YOOHE is made with premium quality silicone and aluminum definitely a must-have for any tool kit or garage!

12. FCHO Glass Suction Cups Heavy Duty Aluminum Vacuum Plate

Shop Amazon

Key Specifications

• Around $20
• Suitable for moving heavy objects
• Made with good quality materials
• Includes rubber suction pads
• Can lift around 200 lbs
• Customer service available

This product is what I would consider a last resort dent puller but it will suffice in certain situations. The FCHO Glass Suction Cup is very much that, a glass suction cup that is used to carry heavy flat, and smooth objects like glass, plastic, and sheet metal. But many of the traits that make this product excellent at clinging onto glass and metal make it a good candidate for attaching to a car door and hood. I would suggest looking into other dent pullers on this list but in a pinch, you would definitely be able to pull very large dents out of a vehicle with this product no problem.

This product features suction cups with an aluminum alloy body and has the ability to produce a strong suction force. This suction tool can be used to fix the gaps between laminated glass floors as well as those in the bathrooms. The high-quality cups, which were voted to be top rated by Amazon itself, can help you lift around 200 lbs. without any damage done to the equipment, materials, or you. The radius of each up is around 2 inches and the rubber pad producing the suction is about 7mm thick.

Buying Guide For The Best Dent Pullers & Dent Repair Kits

Before choosing the car dent pulling kit of your dreams, you first need to know everything there is to know about car dent pullers.

We thought about compiling the most comprehensive guide to buying a DIY car dent kit but first realized the importance of having a foolproof buying guide for every person out there, regardless of their expertise level.

Here, we’re going to be covering the basics of car dents, when they can occur, what dent pulling is, and how you can pull a dent, and much more in a fun FAQ session of sorts.

So, without any further ado, let’s start!

What are Car Dents?

Unlike the Al-Dente pasta (sorry, we couldn’t resist), car dents are small bumps or crumple in the metal framework of your car. These typically appear due to a fender bender, hitting your car against another metallic surface, or grazing a pole or a fire hydrant. More natural environmental factors can also cause this, including hailstorms that hit your car like bullets at high speeds and place small but annoying dents in your car.

Dings are smaller dents, which are about 0.5″ in diameter and occur as a result of a rock being hit on the car or even when the car door is shut too harshly. Careless shopping carts in parking lots can also be a real cause of dings forming on the body of your car.

Dents are crushed in parts of your car’s body. They are well anything bigger than the 0.5″ inch mark. We know you don’t keep a ruler with you everywhere you go, so here’s a rule of thumb. If someone sees your car and their immediate reaction is, “What happened to your car?” it’s a big dent.

Frequently Asked Questions about Dents and Dent Repair Kits

Can’t I Just Take the Car to A Body Repair Shop?

Well, yes, you can. But that would defeat the purpose and benefits this article offers. Some benefits of going to a mechanic are getting professional help once and for all. Their expertise can also help you nip other issues at the bud.

The cons, however, include the excessive cost they may charge for rather simple fixes.

Can I fix the dents with a plunger?

You may be able to fix the dents, or you may not. It all depends on where the dent is and what is the extent of the damage.

If the damage is somewhere on a sharper angled surface, throw the plumber out. It just won’t do. But, if the damage is somewhere on the body of the car, such as the plastic bumper, or hood you may be in luck.

The hot water and plunger method works only for the plastic parts of the car.

The method is simple:

• Take scalding hot water and a plunger to your car.
• Now pour the water onto the plastic bumper surface that has been indented.
• The plastic should soften (or melt).
• Put the plunger on this scalding hot plastic, and with all the strength you have, pull.
• Pull the plunger till the plastic pops right out.
• If it doesn’t, keep going at it.
• Honestly, just keep pulling at the hot plastic dent. But please make sure the plastic is sufficiently hot.

What are PDRs?

A Paintless Dent Repair or PDR is a widely used dent repair procedure, called PDR for short, which is seen as very cost-effective and also environmentally responsible. For low-impact dents, mild dings, dents originating from hail damage, a small object coming into contact with the car, and door dings, PDR is perfect.

It is a way of removing minor dents and dings without removing any paint from the car. Using advanced tools, this is achieved by massaging the dent from the back of the frame very gently.

Paintless Dent Repair (PDR) includes the reconstruction of dents and dings on cars while also preserving the original framework.

What kind of damage can PDR fix?

Simple everyday damage that PDRs can fix includes:

• Harm from hail.
• Damage from rocks or pebbles hitting the surface.
• A shopping cart bumps into the surface of the car.
• Fender bender accidents.
• Different types of dents and dings.
• Parking accidents that can result in dents.

How well does PDR work?

The location of the dent and its depth are the key factors in determining how well PDR will work. It is possible to effectively patch dents the size of a pan lid, as long as they are not too deep. On the other side, since the metal is too elongated, certain dents that are as small as nickel but very deep cannot be patched using Paintless Dent Repair. If the paint on the surface is cracked, it may be a sign of being too deep for a dent.

The average size of a dent that Paintless Dent Repair can fix is around a tennis ball’s size. It is possible to patch most (about 95 percent) minor dents. Due to depth or position, about 5 percent of small dents cannot be repaired. Examples of poor positions include areas such as some heavily damaged hoods and panels.

The good thing is that once the damage is repaired, it won’t come back.

What kind of damage can PDR not fix?

Not all damage can be repaired using the Paintless Dent Repair. For example, abrasions that have ruined the paint’s surface are not damages that can be reversed using the Paintless Dent Repair. PDRs can also not fix scratches appearing on the car’s surface or the ruined car paint caused by peeling or bubbling. If the paint finish has been damaged, it is important to refill or repaint to protect the metal of the car’s body and avoid corrosion.

More intrusive repair techniques may involve deeper indents and pits, which have further strained the vehicle’s metal.

What are the major benefits of using PDR to fix car dents?

The key advantage of using PDR is the quality of the fix. This strategy is the nearest you can come to the dent that never happens. As the original factory paint job is not disturbed, and no extra post-recovery priming is required. It is also one of the most common types of car body repairs offered by the mechanics.

A significant advantage of PDR is also expense. Usually, replacements are also only one-third of the cost of a traditional dent repair.

Time savings are also another gain. It is possible to patch several dents in less than an hour. With Paintless Dent Repair, hail damage is usually repaired in one day. For the same sort of damage, a body shop can take over a fortnight.

How much do PDR repairs cost?

While paintless dent repair is usually an inexpensive way to get results that look decent, the price can vary significantly. It may cost between $75 and $125 for small dents and scratches and between $150 and $450 for more extensive damage, such as dents caused by nasty fender benders. It can cost up to $2,500 to sustain significant hail damage covering large parts of the vehicle. Based on the following variables, the price may be difficult to determine without assessing the overall damage done.

Based on the following variables, the price may be difficult to determine without assessing the overall damage done.

The cost is determined by keeping in mind the following factors:

Degree of Damage

The approximate cost would be influenced by the amount of vehicle body panels that need dent repair, as well as the number of dents in any one panel.

The Size and Depth of the Dent

In the automotive industry, technologists also use coins to define the extent of dent injury. If the observable effect is the diameter of a dime, penny, nickel, quarter, or greater, we can measure the cost of repairing it. The cost also depends on how deep the dent is.

Can PDR fix dents and dings?

Even the tiniest chip in the body of your vehicle will ruin its appearance and reduce its selling price. Unfortunately, even if you wrap your car in plastic and never use it, there is still a chance that the car can have indentations.

Paintless dent repair (PDR) is an economical option to restore the car’s body to its original condition in a fraction of the time and cost. The majority of car dent removal, which includes filling body fillers to fill the cavity left by dents, is not as long-lasting.

Here are three main types of dents that can be removed effectively by removing paintless dents:

• Round Dents consist of all ball-shaped holes like those cast from hailstones and other round objects such as footballs, tennis balls, baseballs, etc. A rounded dent automatically develops when these items reach the arch, rim, roof, or hood.
• Car Dings are the kind of dents that happen due to typical damage from a parking lot collision or even a regular fender bender. Most harm of this type, often even with a tiny scratch, chip, or crack in the paint, is reasonably inexpensive to fix. It is typically more valuable to have it fixed with PDR for the price of your vehicle. It is expected that used cars will have slight imperfections, such as mild scratches or tiny dings. Clean vehicles, however, sell quicker and for more profit.
• Crease Dents — Typically, these dents are more time consuming and costly. They are more likely to extend the metal of your car. That doesn’t mean, however, that they cannot be repaired through PDR. With the advent of instruments and innovation, creases are no longer the hazard they used to be.

What is the difference between Paintless Dent Removal and other traditional methods of dent repair?

Typically, PDR is non – destructive, fast, reliable, cheap, and approved by those in the automotive industry. PDR is also new to the market and could still be dismissed by more traditional car owners.

Here is a contrast of the conventional approach with the Paintless Dent Repair Method of repairing dents.

PDR Requires a Minimum Amount of Work

Of all the kinds of body repairs required, the least amount of work is involved in PDR. To force out the dent from the inside of the vehicle’s body, the repair shop technician just needs to use a specialized tool. This ensures that the use of fillers, scrapers, painting, buffing, and waxing does not require a single repair. Ultimately, less effort is equal to less trouble getting your car fixed.

PDR Guarantees Faster Repairs

Since PDR does not use the lengthy, invasive dent repair methods typically used in the auto-body repair industry, your damage can be resolved easily. You should have your car fixed within a couple of minutes to an hour, based on the number of dents. However, severe damage can take a few hours to repair, which is prevalent during extreme hailstorms. You will get the repair done days, if not weeks, quicker than a conventional repair when you equate PDR with more conventional dent repair techniques. In certain situations, with PDR techniques, the auto body shop can be ready to reach your location to repair.

Better Quality with PDR

The coolest thing about PDR is that it helps retain the factory paint and your vehicle’s pre-event condition. The efficiency of a repair with PDR techniques is better than a conventional repair due to these variables. If the products contained become dislodged, conventional dent repairs are subject to degradation and may change the paint job’s color. PDR removes these problems.

Maintenance Costs Shrunk With PDR

The cost of PDR is lower than the equivalent cost of making a conventional repair when you consider the decreased amount of time spent repairing with PDR and the small toolbox needed to make the repairs with PDR. Dents that have caused damage to the vehicle’s paint and finish can require further work, which will drive up the cost. Luckily, most hail dents do not have extra damage of this kind, so that you can remove the dents at a lower rate.

PDR Is Automotive Industry Approved

Some may argue that PDR approaches are not a feasible alternative to make dent repairs. This is nonsensical. The importance, durability, and sustainability of PDR for your vehicle are understood by many auto industry organizations, including insurance providers, car dealers, automotive repair shops, and vehicle operating service providers. Besides, these parties understand how repairs can save money through PDR techniques throughout the auto industry facets, which is beneficial to any organization.

What are Car Dent Pullers?

Auto dent pullers lift dents from the metal framework of the car, simultaneously straightening the metal. The two primary types of pullers exist: suction lifters and glue dent pullers.

• Suction dent pullers act like plungers, and to extract the dent, you attach it to the dent and pull up towards you.
• Glue indent lifter kits need a flat pulling tab to be glued directly onto the dent. There is a screw feature on the pulling tab, so you rotate the handle to pull the tab back and away from the car.

Other kits connect the pulling tab to a pole. To provide the outward pressure, you then move a mass along the pole, like a bike pump.

Can At-Home PDR Repair Kits Work?

Dent pullers operate only on superficial dents placed on a smooth, flexible surface. They can enhance the condition of automotive dents, but a flawless finish is not produced. Unfortunately, strong, angular dings or damage along the margins of body panels will not work on DIY dent pullers. Dents are exceedingly harder to eliminate at home, where the car framework is thicker.

What are some of the pros and cons of at-home DIY PDR Dent Puller Kits?

Benefits of DIY Dent Pullers

• In the immediate future, DIY dent-pulling kits will save money.
• While it is fixed, you don’t have to be without your car.
• You can decide how your car is fixed.

Disadvantages of Dent Lifters

• It is very time-consuming to use a DIY dent puller, especially if you have no prior experience.
• With a DIY dent pulling package, you cannot achieve a perfect finished look.
• Making the damage severe, which would then entail a more costly fix.
• As this would exacerbate the damage, you should not use a dent puller on an area that already has paintwork damage.

What are the different kinds of DIY Dent Puller Kits?

The directions that come with your dent puller kit are necessary to obey. Bear in mind that it can take multiple attempts to remove the damage from certain car dents.

The very first step is to wipe down the car’s surface. This will eliminate any dirt and grime.

Then dry the affected areas completely, as this will help the dent lifter hold to the metal.

Suction Dent Pullers

This dent puller would use heavy suction to clamp onto your automobile, and you have to use brute strength to pull out the dent once it has latched on.

These dent pullers are more suited for small and shallower dents that are not quite strangely formed because they need some muscle strength to be used.

• Use a small amount of water to lubricate the suction surface and bind the puller to the car.
• Attach the puller to the middle of the dent for tiny divots.
• Simply pull at the sides for big dents and make your way toward the center.
• Start pulling it straight up towards your body until the puller is rigidly connected to the vehicle.
• Instead of one large pull, use tiny, fast pulses.

Glue Dent Lifters

The most popular method and what many users seem to use is the glue pull dent lifter. These dent pullers may enable you to mount them to the dented area using glue and then pull the dent or ding out.

• Select the pulling tab which fits the dent size best.
• Heat the glue gun and add a glob to the pulling tab at the rim.
• Attach the tab to the dent, but be mindful not to get too hard-pressed. A layer of adhesive between both the tab and the metal should be in place.
• Enable the glue to set for a few minutes or until it is hardened.
• Connect the pulling device over the pulling tab and start removing the tab from the vehicle. Be sure to use fast, short movements.
• Clean the glue with the material offered if the tab pops off before the dent is removed, and start the process again.
• In the case of any bumpy raised areas, a rubber mallet hammer may be used to tap them down quickly

Slide Hammer Dent Pullers

The slide-hammer is built to withstand more pulling force and consists of a long straight body, a T-handle, and a cylindrical piece connected in the center.

To make indent lifting simpler, this shifting middle piece will produce extra strength as users do not have to exert too much power.

These are more comfortable for beginners, and the construction also makes them suitable for handling larger dents.

Bridge Dent Pullers

As they are intended for various kinds of circumstances, many dent puller kits will have both the T-bar and bridge dent pullers.

The bridge dent puller consists of a few supportive mechanisms connected to a flat bar and a lever with a screw in the center. The pad that is connected to the body of the device is connected to this screw mechanism.

When working with dents that are in more difficult places to hit, bridge dent pullers such as BBKang PDR-05 are perfect. They may also come in handy when you need extra leverage to pull out bigger dents.

What are some features to consider when choosing a Dent Puller Kit?

There are only so many DIY dent puller kits out there in the market. But which is best suited to your needs?

Here is a list of some features you should be mindful of when choosing the dent puller that suits you best.

Cup Size

A significant item to remember when browsing for a dent lifter is the cup size. We make sure the cup size is ideal as the cup size affects everything from the width of dent you can pull to the overall efficacy would be affected.

There will be cup sizes for most dent pullers starting from as small an inch in radius to as wide as half a foot long in diameter.

A larger size cup is more desirable if you require working with wider and deeper dents, making the process smoother and more efficient.

Handle Construction

The quality of the handle you use with the dent puller is also just as important. You connect with the dent through the handle.

The handle must be durable and well-constructed and must be able to endure the force used to lift the dents without fracturing.

Previously, these handles were typically made of plastic, but many modern models will use premium quality stainless steel to make their handles, particularly T-bar style dent pullers.

To make the dent lifter easy for everyone to use, the grip should also be comfortable to hold and secure in your palm.

Seal Quality

The seal consistency is another significant aspect to remember. The rubber’s texture matters a great deal since all the seals are made of rubber.

The rubber comes into contact with the body of the car and is engineered for optimum performance to ensure an airtight seal.

A good rubber quality means that you have a great seal to create a vacuum so that even the biggest dents can be pulled out quickly.

Final Thoughts

Feel free to leave us feedback below on any experiences you may have already had with any products on our list. Also, please let us know if you think we missed an important product should be included in our list, we would love to check them out! Here at Mechanic Approved we hope that we were able to help you find the Best Dent Puller or Best Dent Repair Kit to help you smooth out those pesky problems!